View SS32_507000.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SS32-S310
SS32 - S310
Features * * * *
Metal to silicon rectifiers, majority carrier conduction. Low forward voltage drop. Easy pick and place. High surge current capability.
0.280 (7.112) 0.260 (6.604) 0.124 (3.150) 0.108 (2.743)
2
1
0.245 (6.223) 0.220 (5.588)
0.320 (8.128) 0.305 (7.747)
SMC/DO-214AB
0.103 (2.616) 0.079 (2.007)
0.060 (1.524) 0.030 (0.762)
0.008 (0.203) 0.004 (0.102)
0.012 (0.305) 0.006 (0.152)
3.0 Ampere Schottky Barrier Rectifiers
Absolute Maximum Ratings*
Symbol
IO if(surge) PD RJA RJC Tstg TJ
TA = 25C unless otherwise noted
Parameter
Average Rectified Current @ TA = 75C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Ambient** Thermal Resistance, Junction to Case Storage Temperature Range Operating Junction Temperature
Value
3.0
Units
A
100 2.27 18 55 17 -55 to +150 -55 to +150
A W mW/C C/W C/W C C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on FR-4 PCB 0.55 x 0.55" (14 x 14 mm).
Electrical Characteristics
Parameter
32 Peak Repetitive Reverse Voltage Maximum RMS Voltage DC Reverse Voltage (Rated VR) Maximum Reverse Current TA = 25C @ rated VR TA = 100C Maximum Forward Voltage @ 3.0 A 20 14 20
TA = 25C unless otherwise noted
Device
33 30 21 30 20 500 750 34 40 28 40 35 50 35 50 0.5 10 850 36 60 42 60 38 80 56 80 39 90 63 90 310 100 70 100
Units
V V V mA mA mV
1999 Fairchild Semiconductor Corporation
SS32 - S310, Rev. B1
SS32-S310
Surface Mount Schottky Barrier Rectifiers
(continued)
Typical Characteristics
Forward Current Derating Curve
PEAK FORWARD SURGE CURRENT (A) 3 FORWARD CURRENT (A) 100
Non-Repetitive Surge Current
80
2
RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.55 x 0.55" (14 x 14) mm COPPER PAD AREAS
60
40
1
20
0
0
25
50 75 100 125 150 AMBIENT TEMPERATURE ( C)
175
0
1
2
5 10 20 50 NUMBER OF CYCLES AT 60Hz
100
Forward Characteristics
50
T A = 125 C
Reverse Characteristics
20 10 REVERSE CURRENT (mA)
SS32-SS34 T A = 125 C
FORWARD CURRENT (A)
10
SS32-SS34
TA = 25 C SS35-S310
1
SS35-S310
1
T A = 150 C
0.1
SS32-SS34
TA = 75 C
0.1
Pulse Width = 300S 2% Duty Cycle
0.01
SS35-S310 TA = 25 C
0.01
0
0.2
0.4 0.6 0.8 1 1.2 FORWARD VOLTAGE (V)
1.4
1.6
0.001
0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
TRANSIENT THERMAL IMPEDANCE ( C/W)
Typical Junction Capacitance
1000 JUNCTION CAPACITANCE (pF)
SS32-SS34
Transient Thermal Impedance
100
SS35-S310
10
100
1
10 0.1
1 10 REVERSE VOLTAGE (V)
100
0.1 0.01
0.1 1 10 T. PULSE DURATION (sec.)
100
SS32 - S310, Rev. B1
SMC/DO-214AB Package Dimensions
SMC/DO-214AB (FS PKG Code P7)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]
Part Weight per unit (gram): 0.21
0.280 (7.112) 0.260 (6.604)
6.18 5.98
0.128 (3.25) 0.108 (2.743)
2
1
0.245 (6.223) 0.220 (5.588)
3.27 3.07
+
4.69 4.49 7.67 7.47
0.320 (8.128) 0.305 (7.747)
0.103 (2.616) 0.079 (2.007)
Minimum Recommended Land Pattern
0.060 (1.524) 0.030 (0.762) 0.008 (0.203) 0.002 (0.51)
0.012 (0.305) 0.006 (0.152)
August 1999, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM
DISCLAIMER
ISOPLANARTM MICROWIRETM POPTM PowerTrench QFETTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8
SyncFETTM TinyLogicTM UHCTM VCXTM
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. D

▲Up To Search▲

Price & Availability of SS32

	To Download SS32 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .